Рабочие будни проектов WETER & GOROD || Венчурные инвестиции в инновации #5

Well, what are you Makimka, you hand over all metal, right? You guys are cool! Take me in a row! For that knowledge will be acquired! Which will save me a ton of money! And Maxim will come in the morning and such a “Hmmm.. We have a couple of problems! We need to find solutions to them!” Today in the issue: Size 3 Layout Layout Errors Let’s see the work done on the GOROD project And talk about the future plans of the team Friends, 10 days a mock spent on the street In the rain, at night, in the afternoon, in the sun The first mistake we saw was that the topmost bearing was open and of course it would rust We already closed it The bearing is closed, thus it is always dry And not exposed to any natural phenomena We realized that it’s worth a little to strengthen the part where the aerodynamic shields are fixed It’s still worth thinking about, this problem has not been solved, it will be solved now! Also here in this way we protected the lower bearing To prevent water from getting here Here is where the buildings are. As the test shows, nothing has changed at the moment. The building fits snugly here, it’s kind of dry here. Layout only out of the rain Such vulnerabilities seem to be no longer visible We have the rotor axis, which is the lower part of the generator It is attached to the bottom of the platform The upper part is attached to the upper platform bearing At the same time, these 2 platforms are held parallel to each other using these acrylic walls And in principle they are not amenable to slight bias And when we shift our roter itself, as we see, it moves It moves and thereby goes astray.

If we promoted the layout 03:07 - the roter starts hitting the coils there and you have to level it Therefore, it is customary to remake the generator and make it completely independent of the platform so that it is in its own case But we will see it, I think in the next layout In general, I am very pleased with this layout and generator And from about 15 to 20 hours a day, he stood on the street and spun, as we did not see what was spinning - it glows In places it glowed quite brightly and interestingly Ongoing work on the GOROD project: Work is underway on the last 4 skyscraper Further in the release you will see all 3 There is also work on the formation of all materials for creating a large layout Friends, at the moment we see 10% of the entire layout of the GOROD project I wanted to talk just about the plans All sorts of trees, grass, rugs for the landscape A lot of different products need to be formed and ordered, which has already been done. Now we expect about 40 parcels from China. Silicone and plastic for the bay. Because it will be necessary to make separate frames Molds will be made and we will multiply small details, because not everything can even be bought. And what is possible, it costs quite more than we can do ourselves You now have the opportunity to understand the approximate scale of the future layout And imagine that these are just 3 buildings ready, and we still have a fourth That is, there will be all this on the big table and it will be a very effective, interesting and informative layout And now a new section “life hack” What to do if the mop is very wide and does not fit in the cabinet What to do if the mop is very wide and does not fit in the cabinet Who has watched up to this point, write the word “Cabinet” in the comments and I will know for sure that you are watching our issues until the very end! .