OLDIE BUT GOLDIE - Ü30 Handspindelmäher Brill Ideal Luxus 38 - der RASENFREAK hat Spaß

[Music] Hello lawn freaks, do you want a little video from the workshop again? Even the weather outside is super nice, I’m now in the workshop. I have to do something else! I have to screw a bit. And I just want to unscrew the handheld reel mower, the old Brill handheld mower, from my father. A little fat, a little maintenance. It’s a bit stiff. Let’s see how the device is structured. And in the second step, in autumn, or when the companies are all open again, I also want to have the parts painted. I want to make it really beautiful, but now just a little maintenance.

00:54 - That it runs a bit easier and more smoothly again. Have lots of fun with it! [Music] Nice these device are so light. But the part is really sturdy and solidly constructed I don’t know how old this mower is. It must be ancient. Nicely done! Nice robust technology. My father just bought a brand new Husqvarna mower, something with 400. It’s just thin sheet metal. well Well, you can definitely unscrew something here. This is awesome. If you look at the devices today and earlier. That is so movable here. Also beautifully done in such a setting. Runs here, but in plastic…

you could also mill it from metal, that would also be cool… this height adjustment runs back and forth here. Quite normal screws, one would have to renew them too. Clean parts a bit. Then I look first… that’s so wrong… Oops, it is falling off. But still looks good. But it looks really good. Clean up a bit. I’ll first.. that’s just a very primitive split pin… I need more light here… It would be cool, of course, to mill it out of aluminum. Plastic, but is sturdy. We are now taking off the handle here, I only have to loosen two split pins here. Easier said than done. So really amazing. I don’t want to know how old these roles are. But they’re not worn out. Can we grease a little. They hardly have any play.

Insane 03:44 - Not the fingers, not the fingers! Still dangerous, still dangerous! It’s just rusty. Yes, it doesn’t cut quite as well here. I also want to sharpen the knife, backlap. No play? Zero play? Fat feather in here, mega cool. Mega cool! Right - so very fantastic lower knife setting, with a fat bias spring, Here with such an adjusting nut, so you can pull the lower knife really cool onto the spindle. Mega! I have to put on gloves. We can do the knife test. Let’s do a cut test. Cuts fantastic! incredible cool You don’t need to do anything. It cuts excellently.

05:47 - Outstanding!!! Insane how it cuts. I call that attention to detail. There is a cut-out especially for the screwdriver so that the cover can be levered off. Incredible!!! Ohh, really greased, really greased. Fantastic!!! That’s what I call technology. Then there is a clamping disc on it. Also robust! Nice with a groove here. And then a spring washer. Great. Gloves! Gloves, the spindle is still turning. I mean I see a screw there, a screw in there.

07:30 - There’s a screw in there, maybe I’ll loosen it. There is a screw. That’s it… freaks. That’s it! What’s holding the screw now 😟 ??? That was the central screw. ohh dirty But also great! Really robust plastic part. Ohh running… Boa is the tight fit… Yes, if you push that… out! It needs… so that’s insane… it didn’t really turn on it… Now we have a reason… ohh a wedge… Sensational! The device is not closed at all. Sensational!!! A very solid rubber tire, really fat rubber.

09:44 - Insane Of course that’s the point now. You can’t do much about transmission ratio. Change the gear here now… is of course not possible. You can’t change that. It’s a bit of a shame. I’m not going to take apart anymore. Now it’s greased a little, cleaned a little. And then it’s good. Now I have washed the parts here. Look like new! Incredible Insane Now I have the small parts here. Safety glasses, safety glasses! This is cold cleaner. Then we can screw the good piece together again.

11:02 - This is also a really fat sheet! That is so fat. How fat is that? The bottom knife is made of sheet metal and the sheet is a 5 mm sheet. Insane Now oil it with my favorite oil. Oil everything a little. Inside and outside. As corrosion protection. I’ve already assembled the other side so that I don’t embarrass myself. It worked😅. Here is such a disc. It comes up here as a spacer. Then we have this wedge here, it must now in the correct way, that it runs into the notch with the sharp edge here.

12:08 - It sits like that and then it is pushed away from here, and here the notch runs in. About as.. Then we take a little bit of fat now. How does it have to go? So it has to go around! It slips through, it slips through. Now a little bit of fat comes in… a little fat Andreas! Fantastic!!! Now that’s how it cuts… It’s so easy. Now I grease the ring gear again very easily. That certainly can’t hurt. Well, I have to reassemble it here now, that was nonsense to dismantle. If you can make it that way. Push in again… a little grease here… a little bit!!! fat.

13:25 - And screw in or plug in again with a nice rotating movement. It is also completely greasy. I have a cloth consumption! Well, it’ll stick through there. And now it’s just put back in there. You don’t see now! Zack through the hole. I can turn it off. There it is now… the spacer on there… and a new mother, of course. A new mother, of course! Not such an old, battered mother. It did its job. Is still not completely clean, there is still dirt on it. Incredible I have to turn again and hold up. Otherwise it turns with.

15:01 - What I find interesting is that it grinds here. I don’t think that’s good, and that’s what bothers me right now. It bothers me that it’s grinding there now. There it runs freely, and here it grinds on the housing. So I’m going to put a spacer in between. Then I’d rather take the little one here, it was sitting in between. To make a little more space, so that it’s not on the housing, you can see the freaks there it is already ground in. We don’t want that. No, we don’t like that. So now it has a little more space. It’s fantastic, it doesn’t grinds, cool. I don’t know how around they were. Very nice. Smacky !!! You can also do this, so that the roles roll. Made noble. We fish for the last screw. Almost final screw. Spray… Fantastic !!! Now let’s put it on the metal plate here. So freaks, now you see here there is even a mark. And now we’re going to really go down, that’s at the bottom. It’s done really cool. That is now not 100 percent accurate.

17:51 - So freaks, I’ve now got a block of metal that is 15. And I can push it in here now then I see roughly what the cutting height is. We have about 17 and we have less there. So it has to go a little higher there. Now it’s on the edge, that’s better. 15 mm, oh see, here it was almost at 15. Not much was missing, yes, that was cool, right on edge. That’s amazing. It now runs completely silently. Completely silent! How is it cutting now? Cuts… cuts… etc.

😊 18:59 - I hope you see that! Is that awesome! Finished Now we have just a quick mowing at the end, 15 mm on my tee. And you can also watch it. Thank you for watching. It’s going really well on my lawn freak channel. Thank you for subscribing to me 👍. And thank you very much if you still subscribe to me. Lawn and cylinder mowers are really hyped here. And I am glad that you are there. Until next time. Your Lawnfreak bye You don’t hear anything anymore, you don’t hear anything at all. The mower doesn’t like stones either! .